Ground reconstruction construction scheme

• 01

  The original floor of the workshop with a wool chisel into a pitted surface

  In order to better combine the cement and the ground laid in the later stage, the finished hemp surface is cleaned

• 02

  After cleaning, sprinkle a layer of mortar on the hemp surface

  Cement and water into a paste, evenly sprinkle

• 03

  Lay new fine stone concrete (10cm thickness)

  Install the metal floor flat on the newly laid cement floor, and make some cement emerge from the floor holes during installation; Install in place as accurately and quickly as possible during the laying process to avoid excessive water overflow from the concrete (water overflow affects the strength of the floor and is not easy to clean up later)

• 04

  Use dry cement to smooth the overflow cement in the floor holes so that the cement is in the same plane as the floor until the floor surface is clean and there are no gaps in the holes

  Items 2,3 and 4 should be carried out at the same time to avoid the difficulty of cleaning the cement after drying

• 05

  Do not work or walk on paved surfaces for a week

  After the cement is dry, the surface of the floating soil can be swept away and put into use

Workshop Floor Renovation Construction Plan

• 01

  Polish the old workshop floor to make it smooth so that it can better integrate with the old floor.

  Clean up after sanding. Make sure there is no dust etc. when gluing to avoid affecting the bonding strength.

• 02

  Drill holes in the laying area according to the location of the floor screw holes.

  Ensure the success rate of punching.

• 03

  Fill the hole with implosion. And apply glue to the installation area.

  Glue will also flow into the hole for reinforcement

• 04

  Lay the steel floor and tighten the fixing screws.

• 05

  Clean excess glue from the floor surface.

  During the construction period, due to the characteristics of the glue, some glue will come out, but there is no impact. Just wait for the glue to dry and then clean it.