Metal Flooring Installation Instructions

Ground reconstruction construction scheme

• 01

  The original floor of the workshop with a wool chisel into a pitted surface

  In order to better combine the cement and the ground laid in the later stage, the finished hemp surface is cleaned

• 02

  After cleaning, sprinkle a layer of mortar on the hemp surface

  Cement and water into a paste, evenly sprinkle

• 03

  Lay new fine stone concrete (10cm thickness)

  Install the metal floor flat on the newly laid cement floor, and make some cement emerge from the floor holes during installation; Install in place as accurately and quickly as possible during the laying process to avoid excessive water overflow from the concrete (water overflow affects the strength of the floor and is not easy to clean up later)

• 04

  Use dry cement to smooth the overflow cement in the floor holes so that the cement is in the same plane as the floor until the floor surface is clean and there are no gaps in the holes

  Items 2,3 and 4 should be carried out at the same time to avoid the difficulty of cleaning the cement after drying

• 05

  Do not work or walk on paved surfaces for a week

  After the cement is dry, the surface of the floating soil can be swept away and put into use